Datamartrix marked with fiber laser engraver

Metal Engraving

Discover our rotary and laser engraver for metal!

Since men discovered the ability to shape metal years ago, we have been marking it, be it for artistry, personalisation or traceability.

Metal is complex: conductive, reactive, composed of chemicals, alloys... When you are looking for a rotary or laser marking machine for metal, the best solution will depend on the type of metal you will be engraving:

  • Stainless steel aluminium
  • Anodised aluminium
  • Hardened metals
  • Steel alloy
  • Titanium and titanium alloys
  • Carbides
  • Brass
  • Copper
  • Precious metals
  • Coated metals

Why mark metal?
Metal engraving is used for the marking of text, logos, pictures, numbers, 2D codes, the list is endless. Industries marking metal are various, from jewellery to medical, automotive, aeronautics, and energy, to name a few.

Our laser marking and engraving is done without contact, and does not require any pre-treatment or post-treatment. The result is a permanent, resistant, and high contrast marking with a very high definition finish, and of course without damaging the metal.

Rotary engraving cuts away the metal using an engraving cutter similar to a drill. This allows for both engraving and cutting (on some metals) and is used extensively across all industries from engraving jewellery to cutting control panels.

Direct part marking by dot peen or scribing is performed thanks to a tungsten carbide stylus which comes into contact with the surface and deforms the material in hollow thanks to a succession of impacts which form the final marking.

Gravotech has extensive experience in metal marking and brings its expertise to help you find the best metal engraving solution that will fit your needs. There are many types of metals and we have a machine solution for each of them.

Laser Engraving

Direct part marking on metal

Laser etching can be used on a broad range of materials. Laser engraving occurs when the heat of the beam melts only the surface of the material and does not fully penetrate the material.

The high power of the laser uses high heat to melt only the surface of the material. Oxides sometimes form in engraved areas, making the marks clearer and more visible. The laser modifies its reflectivity and improves contrast. Very little material is removed.

It can be carried out on raw, anodised or plated metal surfaces. Light engraving of metals and oxides. Removes less than .001” of material. High-speed marking. Works on all metals.

Text mark with metal laser engraver

When marked components require reworking or additional painting and the material is rough, laser engraving needs to be applied deeper into the material.

The laser creates high heat during the engraving process, which causes the material to vaporise. This creates a cavity in the surface that is noticeable to the eye and touch. It is recommended when the laser marking suffers post-process stress (such as sandblasting for die-castings).

Fast fusion and vaporisation of the material. Varying the depth is achieved by the number of passes. Only works with filled font/shapes.

Datamatrix marking on metal


Annealing heats the material locally to just below its melting point. This generates oxide layers on the surface of the workpiece which are associated with metallic annealing colours. It is also the preferred method whenever a precision fit is required or there is a need to avoid material bulging.

You can only anneal metals that change colour when under the influence of heat and oxygen, i.e. steels and titanium, but not aluminium or non-ferrous metals. The oxide layer is black most of the time, but it can also have other annealing colours. The colour depends on the temperature of the heated layers. The material surface remains even during annealing because nothing is removed from it. The colour change is achieved through localised material heating only. The heat usually penetrates .02 to .03 mm deep in the metal surface.


Black marking

Black marking is a marking process that produces very high-contrast, dark markings. This structured surface reduces the amount of light that is reflected, and the result is a deep, matt blackening of the marking, which appears the same when viewed from any angle. This makes the marking non-abrasive. Black markings are ideal for rust-free stainless steels, titanium, copper and brass.

Mechanical Engraving

Metal keyring personalized

With metal engraving machines, we drag a diamond tool on the surface of the material to obtain a light and very aesthetic marking. There is no chip created and the material weight loss is insignificant, which is important particularly in jewellery.

This marking process can be used even for very hard alloys such as steel, stainless steel or iron and of course also with softer metals. It is ideal for signage (tags) and personalisation. The groove created in the part can also be filled with lacquer or wax, to obtain a high contrast or colour.

Deep engraving with cnc metal engraving machine

With CNC metal engraving machines the material is removed using cutting tools, «engraving cutters» of various sizes and shapes.

CNC is used for cutting out shapes in metal such as for control panels or for milling out 3D shapes such as the creation of hot stamps, mould insert or soft metal manufacturing. This technology can also be used to obtain text, numbers or logos deeply engraved in the part, whether it is for identification (direct part marking) of personalisation purposes.

This marking process provides excellent non-contrasted results both for cutting or milling, and even our small engravers can do the job in soft metal such as aluminium or brass.

Identification marking of Datamatrix code

Our pneumatic dot peen marking machines are the best for marking applications requiring a very short cycle time to meet the speed requirements of industrial sectors.

The electromagnetic marking machines are more suitable for applications needing great precision and consistency. It is particularly efficient for DataMatrix code marking. The electromagnetic dot peen marking machine is a high-precision marking solution to meet traceability and identification requirements.

Our dot peen metal marking machines are economical with clear marking, marking twice as fast as other dot peen machines.

Vehicule Identification Number deep marking

Silent with aesthetic and amazing results, scribing machines are used in all industrial operations, subject to noise level limitations: large metal components (beams, rails, chassis and exhaust pipes etc.), VIN marking (Vehicle Identification Numbers) on cars, motorbikes and heavyweight vehicles, etc.

This is the best marking/speed depth ratio solution. It provides high quality marking. It was developed for heavy industrial applications, our systems are durable and require very little maintenance.

Discover Gravotech’s solutions

Our complete range of integrated lasers and laser stations will enable you to carry out marking on all type of metal parts, for a permanent result, with excellent quality and contrast for full identification and traceability.

The most complete laser station for permanent marking. From unit to small batch production to integration in a robotic cell. Compatible with Fibre, Hybrid or Green laser source.

Front view of LW2 industrial laser engraver



fully automated laser station


Introducing the magic of laser engraving to your business. The Welase achieves personalisation of the highest quality in a matter of seconds and raises your customers curiosity.

WeLase compact laser engraver



desktop laser engraver for gift engraving and part marking


Our powerful and high-quality Fibre Laser marker performs precise identification markings in short cycle times....

Fiber serie Laser marking system

FIBRE laser


laser marker for metal and plastic parts


The LS900 industrial laser engraver, coming as CO2, Fibre or Edge (dual sources), is ideal for high speed marking and cutting of medium and large format media.

LS900 co2 fiber laser



the large laser cutter and laser engraver


The 1064 nm HYBRID laser marker is a high speed laser perfect for applications requiring a great versatility in terms of marking materials, from plastics to any kind of metals.

Hybrid laser - integrated laser

HYBRID laser


HYBRID laser, versatile laser marker for plastic engraving and metal engraving


The LS100EX laser etching machine is a medium-sized engraving and cutting laser. Its engraving area matches the size of ¼ sheet, making it the ideal sign solution....

LS100Ex co2 laser marking machine

LS100 EX


LS100 EX, laser etching machine for signage and small series


    Our range of rotary machines are able to process light diamond engraving, neat deep engraving, light milling and drilling. Gravotech’s dot peen and scribing solutions offer very fast non-contrasted deep marking obtained by making close impacts on the surface of several metal types.

    Since inventing dot peen technology 40 years ago we have continued to innovate and the XF510P pneumatic marker takes the crown for being the smallest and fastest on the market while meeting our hig...

    XF510P dot peen marking machine



    the fastest pneumatic marker on the market


    The master of marking Datamatrix codes, this electromagnetic dot peen marking machine builds upon our foundations with dot peen to meet the highest standards of precision.

    XF510m dot peen marking machine



    the electromagnetic dot peen marking machine for direct part marking


    This online marking system delivers direct part marking on your parts while keeping noise to a minimum....

    Front view of the XF510r machine



    XF510r, scribing machine for direct part marking


    Unique in the market, this industrial rotary engraver also is a powerful sign solution....

    IS400 rotary metal engraving machine

    IS400 – IS400 Volume


    the engraving machine for flat and cylinder engraving


    As the best-selling engraving machine, the M20 can adapt to any purpose and fit any job....

    M20 Custom engraving machine



    multi-purpose desktop engraving machine: from gift to plaque engraving


    The Impact is a benchtop dot peen marking machine easy to configure and master. Take your business to the next level, whatever its size and expertise.

    Impact marking station: dot-peen marking machine



    IMPACT, industrial dot-peen marking station 


    Fast, powerful, and precise: discover a CNC router unique in the market. The ISx000 range is designed for large format jobs to batch engraving and metal cutting.

    ISx000 large format CNC engraving machine.



    the large format CNC engraving machine.


    This label engraving machine and part traceability system has been a classic for more than 15 years for small part traceability, small signage and label engraving....

    IS200 rotary engraving machine



    IS200, label engraving machine and small part traceability system


    The M10 rotary engraving machine is a simple and secured engraving machine for a pre-defined medal, keyring and small identification plate engraving....

    M10 Small rotary engraving machine



    Compact engraving machine for pre-defined flat items