Wood is one of the most popular materials and its usages are continuing to spread, thanks to the style of wood crafts and people awareness for a more ecological world.
Laser technology is the favourite solution to enhance the elegance of wood material and transform it into a unique craft as it can give different engraving aspects and cut precisely. Moreover, it can engrave and cut a huge wood variety: Beech, Walnut, Oak, Birch, Bamboo, Maple, Pine, Cherry... The CO2 laser engraver is respectful of the wood when processed, so varnish or paint can be applied afterwards.
The following wood materials can be easily processed with a laser:
Main wood applications:
Our solutions, from a wood sheet, can create kerf, hinge, or malleable area to give a potential movement.
It opens innovative possibilities such as large book covers, mechanisms or any complex shape.
A laser-cut edge will produce a burnt aspect. Gravostyle™ software, thanks to its setting library, gives the user the possibility to increase or decrease the darkness level of the edge.
In terms of engraving, there are wide possibilities: the options range from light colour (low power, high speed), different brown shades to very dark (high power, 2mm defocus), depending on the wood variety and laser settings.
Photo engraving, letter cutout, name and logo personalisation, prototype cut, one laser can do them all.
CO2 lasers are using the natural burn reaction by vaporising the wood. Therefore, there is no chemical product needed or generated when the wood processed is also natural (like solid wood for instance).
Gravotech also offers a range of different plywood that is PEFC™ certified, meaning that the trees are from certified sustainable forests and the glues are respectful for the environment.
Our fume exhaust benefit from high-efficiency particulate air (HEPA) filters, that remove harmful fumes and return clean air.
Wood processing with a laser generates no chip, just smoke, gas and dust that can safely be handled by a fume exhaust.
Some kinds of wood such as plywood, composite or OSB generate an important amount of fumes, gas and particles linked to the glues used.
We strongly recommend the use of a filter accessory in addition to the fume exhaust, as it will drastically increase the HEPA exhaust filters lifetime and reduce the cost of use.
The precision of our CNC wood etching machine is equivalent to the one from the laser technologies.
CNC Milling is only limited by its minimum tool size, so it can’t do the very thin details in 2D operations. However, such details can be obtained by using the 3D capacities from the machine and our Gravostyle™ software.
Contrary to laser technology that burns the wood, our rotary technology is milling the material so there is no risk of fire ignition.
Therefore, the operator does not have to monitor the equipment, which saves time.
Milling on wood does not generate burn areas, so the colour obtained after processing is the wood natural colour.
This feature is particularly enjoyable when the aim is to promote the natural rough and ecological side of your wood creation.
Our Laserwood material is finished ready to be used that can directly be processed (engraved or cut) with no other operation needed (polishing).
Our Birch is a PEFC™ certified material, it is sourced from sustainably managed forests, in line with the strictest environmental, social, and economic requirements.
With its natural composition, Birch in environmentally friendly. PEFC™: Program for Endorsement of Forest Certification Scheme. For more information, visit www.pefc.org
A choice of 4 different Laserwood: Birch (PEFC™ certified), Beech, Oak and Walnut.
With a range of thicknesses from 4.5mm down to 0.4mm and ready to work with laser (C02) or rotary or even add colour with UV printing. The opportunities are endless but the choice is yours.
Most non-dense woods such as MDF or Plywood can be cut even with our smallest laser power.
Higher power ranges can be used to cut thick wood material. Gravotech offers unique accessories ideal for Laserwood and other Plywood processing, such as honeycomb table quick clamps and clips.
Introducing the magic of laser engraving to your business. The Welase achieves personalisation of the highest quality in a matter of seconds and raise your customers curiosity.
...The LS100 is an easy to operate and compact laser engraver to cut and mark a wide range of materials....
The LS900 industrial laser engraver, coming as CO2, Fibre or Edge (dual sources), are ideal for high speed marking and cutting of medium and large format media.
...The CO2 laser marker is perfectly suited for marking organic materials....
The LS100EX CO2 laser machine is a medium-sized machine for engraving and cutting. Its engraving area matches the size of ¼ sheet, making it the ideal sign making machine....
Numerous innovative functions and features are combined into the LS1000XP, turning it into the ultimate engraving and cutting laser for intensive production.
...Large tables can be a nice tool for wood processing, thanks to the 750W high-frequency spindle and its large-diameter brush nozzle for easy chips evacuation.
Gravostyle™ is an all-in-one software that allows you to create your composition and run the laser easily. It embeds a material library that will help to select quickly the best setting for your material. However, for users already trained on other software, our lasers can also be driven by third party-software (CorelDraw, Adobe Illustrator).
One-of-a-kind piloting software for Gravotech laser and mechanical engraving machines
...Lasertrace is the Gravotech industrial software for traceability and identification. Various functions are available in a simple and friendly interface, for all industrial production needs.
...